H-SCF-A is a single core filter series in H-SCF sanitary liquid filter. It is a small flow high grade sanitary filter. H-SCF filter design is in line with the requirements of sanitary grade and GMP. It is a high-end liquid filter applied in the field of life science. The structure has no sanitary dead corner, easy to clean; thorough liquid discharge, no residual liquid worry; mechanical polishing can also choose electrolytic polishing, up to 0.3 m polishing accuracy. Advantage characteristics Ultra high polishing grade, the inner wall reached 0.3 m, the outer wall reached 0.4 m, the absolute health level polishing, a series of optional electrolytic polishing; Exhaust valve and drain valve: thread sleeve and pagoda joint are separated, and the hose will not turn again when the gas is released and discharged; Effectively increase the inner diameter of exhaust holes and drain holes, and connect 8mm tubes to increase efficiency; Using a new segment clamp: 20% higher than ordinary clamps, and bear higher pressure; In the case of high pressure requirements, you can choose to use strong hoop, can be perfectly sealed PTFE sealing ring, the highest withstand pressure up to 1.0Mpa; The foot filter by strengthening thread, not easy to wear, can be used for the 100 time. The adjustable screw is installed at the bottom of the foot support, so that the height of the filter can be adjusted, so that it can be used conveniently.
