application Measuring points with high dynamic pressure load or vibration Suitable for non high viscosity, difficult to crystallize and not corrode copper alloy parts of gas and liquid medium Hydraulic device Compressor Functional characteristics Anti vibration and impact The design conforms to EN 837-1 standard Range: up to 0... 40 MPa describe 113.13 is a plastic shell filled with liquid mechanical pressure gauge. Liquid filling can effectively reduce the shock impact of the internal parts. The pressure gauge is suitable for machinery or factory with strong vibration. The pressure gauge type 113.13 is through the deformation of Bourdon tube to measure the deformation of Bourdon tube, through the form of pressure transmission and show it on the dial. The plastic case and the cover are welded together and sealed by a O ring, so they can withstand the IP65 protection requirements. The conventional dial sizes of the 113.13 type pressure gauges are 40, 50 and 63, with a precision of 2.5. They can be widely used in the industrial field, and can also be equipped with mounting brackets, and also can be installed by the back bracket to meet the installation of the dial. 63 of the conventional table can be installed through the back or through the front belt side, the front edge is generally applicable only to the front of the installation.
